Farm Tek "Elecetronic Sports Timing"
With the FarmTek Wireless Scoreboard Interface Eliminate the long cable that runs from the timer in the announcer's booth out to the scoreboard . The interface works with any of our scoreboards when paired with one of our timer consoles made in 2005 or later. The Wireless Scoreboard Interface is a small wireless receiver that sits on top of your scoreboard and connects to the data connector on the side of the scoreboard in place of the long data cable. The wireless interface duplicates all functions of the standard cabled interface. No batteries are required – power is obtained from the scoreboard. You can continue to use your timer and scoreboard wired or wirelessly as needed. The wireless interface easily snaps on and off your scoreboard for use or storage.
A FarmTek timer automatically starts timing at zero when the steer crosses an electric eye at the score line. Broken barrier? An electric eye on the rider's box(es) checks for breakouts. The timer sounds a horn and shows the breakout. The timekeeper simply has to press the STOP button when the arena judge drops the flag. No reset required — no waiting for lights to turn on or off, no missed resets, no delays! The rider's breakout time can be displayed during a roping event. The breakout time shows by how much the header led the steer (breakout) or trailed the steer (clean run). The Roping Practice Mode lets you practice against the electric eye barrier and measure your time leading or trailing the steer without requiring someone to operate the timer console. Do you need to average the time of two manual times for your roping event? This can be done by adding one or two of our wireless hand switches. With one hand-switch, one judge presses the start/stop button on the Polaris timer and the second judge uses the hand-switch. With two hand-switc